Controlar’s CMC line integrates robotic handling, heating, functional testing, vision inspection and label application for cell management controllers. Four stations organize the process from loading and preheating through testing, inspection and depalletizing, supporting automotive production requirements.
Combine CMC testing, inspection and labeling in one line
- Automatic loading, palletizing and preheating
- EoL and burn-in station with two six-nest modules for 12 units tested simultaneously
- Dedicated vision systems inspect pins and labels
- Automatic label printing and application
Coordinate testing and inspection across four stations
CMCs are essential components of battery management systems and require functional verification against customer specifications. The process starts with robotic palletizing and preheating, bringing the units to the temperature required for testing before transferring them to the EoL and burn-in station.
Throughout the line, pallet indexing, automatic elevators and dual conveyor systems keep units correctly positioned as they move between stations. Functional testing is followed by a dedicated inspection and labeling stage, where separate vision systems check the pins and product labels. Automatic printers apply the final labels, which are then inspected and validated.
At the exit, a robot removes the units from their pallets and directs accepted and faulty products to separate conveyors for manual unloading. Developed for automotive production, the line can be adapted to different product types and specifications, combining testing, inspection and handling in a coordinated process.
