Skip to main content
search

OLS

Offline Handling Solutions
OLS

Highlights

Fast and ergonomic fixture change
Small footprint: other modules may be positioned closely on both sides.
Lateral actuation for DUT connectors (USB, Ethernet, etc.) with controlled insertion force

Tests, Integrations and Fixtures

Tests

  • ICT
  • Digital / Boundary scan
  • ISP – In System Programming
  • LED testing
  • ASA – Analog Signature Analysis
  • Functional
  • Vision

Integrations

  • TRI
  • CheckSum
  • Teradyne
  • Goepel electronic
  • SMH (Flash Runner)
  • CheckSum (MultiWriter)
  • Feasa
  • Huntron
  • National Instruments

Fixtures

  • Fixturing developed in accordance with prior FEA analysis
  • Probe Impact analysis for fixture validation
  • Pallet/Carrier for checking individual (de-panelized) daughter board
  • Mass interface: composed of pins -inserted in the same plane as the probes (flat-top fixture)
  • Easy integration with lateral actuators, scanners, led analyzers, etc..
  • Interfaces (including pneumatic) in the main interface block, avoiding extra cables and tubes

Application Examples

  • Controlar OLS400
  • Controlar OLS 400
  • Controlar OLS 400
  • OLS Productronica

Downloads

Overview

Designed by EIIT- A Controlar company as a cost-effective easy-to-install solution, the OLS (Offline Handling Solutions) Series is the best choice for your offline ICT (In-Circuit), ISP (Flashing) and FCT (Functional) test needs. Its design allows a fast and ergonomic fixture exchange, with less than 3 minutes of fixture changeover time.

Available Models

OLS800-Tsi: Model: ICT

  • High resistance aluminum structure to handle +10KN forces
  • TSi51 HD or TSi52 – up to 2560 TP @ 2.8N/TP + 1280 fixture top/bottom transfer pins @1.1N/TP
  • TSi52 HD – up to 5120 TP @ 1.5N/TP + 2560 fixture top/bottom transfer pins @1.1N/TP
  • Maximum PCB size of 510×460 mm
  • Servomotor controlled compression movement during the test
  • Dual stage testing
  • Servomotor programmable test heights
  • Fixture coding on both bottom and top plates for product/fixture validation
  • 2 modular pilon blocks for integration of additional instrumentation such as CAN, RF, pneumatic or other specific needs
  • 12U rack positions used for Teradyne TSi52 instrumentation integration
  • Machine control communication drivers for .NET, NI LabWindows CVI,LabVIEW or any other third-party platforms with TCP/IP communication sockets

OLS600: Models: ISP, ICT and FCT

  • High resistance aluminum structure to handle +10KN forces
  • Maximum PCB size of 510×460 mm
  • 2 fixture sizes to adjust the exact PCB needs
  • Servomotor controlled compression movement during the test
  • Dual stage testing
  • Servomotor programmable test heights
  • Fixture coding on both bottom and top plates for product/fixture validation
  • 2 modular pilon blocks for integration of additional instrumentation such as CAN, RF, pneumatic or other specific needs
  • 20U rack positions available for instrumentation integration
  • Machine control communication drivers for .NET, NI LabWindows CVI,
  • LabVIEW or any other third-party platforms with TCP/IP communication sockets.

OLS400: Models: ICT and FCT

  • High resistance aluminum structure to handle +10KN forces
  • Maximum PCB size of 300×230 mm
  • Pusher plate guided by four columns, assuring perfect parallel movement
  • Mass interface contacts with spring probes in the handler and pins in the fixture
  • Drawer system for fixture insertion
  • Automatic drawer locking system
  • Fixture coding on both bottom and top plates for product/fixture validation
  • 2 independent modules (handler and bottom structure)
  • 14U rack positions available for instrumentation integration
  • Machine control communication drivers for .NET, NI LabWindows CVI, LabVIEW or any other third-party platforms with TCP/IP communication sockets

Main applications

Complete turnkey flashing, ICT and FCT applications, including (when applicable):

  • Testability (Test Coverage) Report
  • Repeatability (CGK) – Means Capability Report
  • Repeatability (CPK) – Process Capability Report